Turnlock fasteners are used into the ISS = International Space Station we apeared in the local newspaper "Het Nieuwsblad" the 28th of January 2017.

Do you have an alternative for the 34F series? Turnlock can supply the HEHSEG part numbers. They are one on one interchangeable with the old 34F part numbers., Old part numbers New part numbers , The old part numbers are either cadmium plated or zinc nickel plated. New references are all zinc nickel plated.

What's the new part number for 5S15-*A or 5S15-*B? The new part numbers are respectively LMHTLCP-*S and LMHTLC-*SB

Do you have quicker available version HHSTLW turnlock? Turnlock can offer the special version HHSTLWT as an alternative with only 4-6 weeks lead time., While this is the turning version:, Here are the part numbers for the new HHSTLWT version:

Is there an alternative to the cross headed 40S41 parts?, Old

A quicker available offset wing hea,

The part 40S41-* is made of high strength stainless steel which has a tension force of 4700N and 3100N working load and comes with a large springcup.  , Old

Can you supply the sealed Cross head of the 4002 series in stainless steel? Turnlock can provide the alternative part to the sealed Cross head in stainless steel: HGRTLSC-*S,

LOPCPTTLWO0810ZP

Can you supply the part 40E28-*-1AF? We can supply our new part number: HGRTLHR-*Z which is the new RoHS conform part number.,

Do you have the 991S500 parts available? Turnlock can provide the parts HHSTLWF-*Z (zinc plated), HHSTLWF-*ZN (zinc/nickel plated), HHSTLWFW-*Z (zinc plated) and HHSTLWFW-*ZN (zinc/nickel plated), , , ,

Yes, We have installation tools for installing retaining washers of quarter turns.

Is there a stainless steel version of HHSTLHR-*Z? Yes, we have the new part HHSTLHR-*S which is the exact same as HHSTLHR-*Z except that it's in stainless steel. Here's a drawing of the part:, <

Quick question does Turnlock have 120-013 available? Turnlock can supply the alternative MPP series.,

Does Turnlock have the 120-040 Part numbers available? Turnlock can supply the alternative MPP series. The 120-040-... is the item code for a set of the MPP series.,

Is there a version of the MPP series in stainless steel? Yes, we have a version of the MPP series in stainless steel: The Flush stud is available in stainless steel:, The part looks like this when installed:, This part has a retaining force of 147 Newton. Here's a list of the part numbers: MPPTLF-1S MPPTLF-2S, Please contact us for an enquiry or more information.

Do you have Milspec products? We have Turnlock parts made according to Milspec products standards. Milspec products and turnlock have the same mechanical and dimensional properties.,

Yes, we supply Steyr alternative parts. Here is a list of parts we currently hold on stock:

Do you have an alternative for this Monadnock part 1105007-5? Yes, TurnLock has a direct alternative for the parts of series,

What is the new tamper proof stud of the MHS series? The new part number for the tamper proof stud of the MHS-series is MHSTLT-*S The old part number was 50E11-*BP,

LOPCPTTLW1010ZP

These parts have become obsolete. However we can suggest an alternative Turnlock part number. Please contact us for an official quote. Minimum order value is 300 USD.,

Do you have an aluminum black coated MTH stud? Turnlock can supply the slotted head black coated aluminum stud MTHTLS-*HSAB It's a high strength aluminum part with an extra black coating.

Our HGR series and MHS series quarter turns are widely used in the aerospace and transport indust

Can Turnlock supply the old 15F part numbers? Yes, Turnlock can provide the new MPP parts which are the new part numbers for Turnlock. Here is a list of the old coatings:, All the coating listed above have become obsolete due to non RoHS conformity. The new standard available parts are steel with nickel plating. Here's a cross reference list: ,

Can you supply the slotted head of the MHS series in stainless steel 316? Turnlock can supply the slotted head of the MHS series in 316.,

Can Turnlock provide the SK27S3-*S parts? Turnlock can provide the MTHFTLC-*SK parts. It has the same mechanical and dimensional properties. Please find below the cross references.,

Yes, this company went bankrupt. We have the following series alternatives:

Discover our Aluminium TurnLock parts These Aluminium parts are typically used in the Aerospace industry., These parts are available in the MTH-series and the HGR-series. Both series have the slotted, cross, and ring handles availabe in the High Strength Aluminium parts. , , Please use these studs with the following receptacles, which are also all Aluminium parts to have a lower weight: MTHR25A, , Please use these studs with the following receptacles, which are also all Aluminium plated to have a lower weight: HGRR33A,

What adjustable receptacles are available? Turnlock has adjustable receptacles available in 2 series: 1) Medium duty Tiny Housed-series 2) Heavy duty Grommet Retained-series   , The MOST important thing about adjustable receptacles is that you can use the same stud length for different panel thicknesses. For example, the panel you have changes thickness from at the beginning of the panel on 1 mm to 4mm,, How to adjust/install: By screwing the insert inside the receptacle more in or out, you can adjust the receptacle to work with the stud at your specific panel thickness., There are regular adjustable and floating adjustable receptacles. Very interesting to know is that most are also available in Aluminium, which makes them very low weight.   , In this video we show you how to adjust the depth of the receptacle: , There is also a special type of receptacle: The adjustable threaded receptacle ,   By screwing this into the prepared tapped hole, You need to use locktite to fix the receptacle in which you can choose where you install it exactly. The following adjustable threaded receptacles exist:, The part MTHRAE428S

Does Turnlock have old 2800 parts available? Yes we have these available under our brand MTHB-series or Medium duty Tiny Housed Bearing - series. Here you can find a list of part numbers:  , Here are the Slotted head part numbers:, This is the list of the cross head part numbers:, These are the old part numbers of the Torx headed studs:, All these studs can be used with the MTH receptacles. To find the exact part number you need, please contact us.

Is there any way to expedite lead time? Yes, we can expedite the following parts: The slotted head of MTH-series, Reason for this is that we can machine these parts by a subcontractor in 2 weeks instead of 16 weeks. Here is a list of part numbers we can supply by machining: ,

Do you have an alternative part for 27S3-*S? Yes, we have our stainless steel stud MTHFTLC-*SK Please find below the cross references: ,

Are there high temperature stud available in the HGR series? Yes, there are the cross and slotted head studs available in the HGR-series.,

Does Turnlock have the old MS2500 parts available? Turnlock can supply the alternative Medium duty Tiny Housed Small studs. They're made according to MS2500., , ,

Are there high temperature stud available in the HGR series? Yes, there are the cross and slotted head studs available in the HGR-series.,

Yes, we have LN29711 parts available, however we consult to buy the alternative ROHS zinc plated version instead of the Cadmium plated version. Pricing is also way higher of the Cadmium plated versions.  , ,    

Can Turnlock supply the 26S13-*-* parts? The part 26S13-*-* all are steel with cadmium plating with a folding wing handle:,

Do you have an alternative for part 27S8-*-3AB?,

Can Turnlock supply the 244-16B versions? 244-16B is the receptacle HGRRTF33BZ which is a floating receptacle, mounted on a bracket.

Do you have an alternative to the 244-22 part number? Turnlock can supply this part number with the correct floating range. The standard version is the part HGRRTF33BZ

Can Turnlock provide the 27S14 part numbers? Although the 27S14 series no longer exists, we can supply an alternative,, Here's the list of the cross references: Old Part Numbers New PN, Old Part Numbers New PN

Can Turnlock provide the 26S97 part numbers? Although the 26S97 series no longer exists, we can supply an alternative, Which is the Cross head stud: MTHTLC-*Z (steel zinc plated) or MTHTLC-*S (stainless steel)  , Here are the cross reference lists: Old part numbers , Old part number New PN

Can you supply the Bombardier PN C353-101A? Turnlock can provide the alternative part number: MTHFTLC-39S  

NASM-5591 and MILF-5591 describes:

Is there an alternative for part 1460L01-1-1AF? Yes, we have alternatives for 1460L01-1-1AF        

Is there an alternative for part 1460L01-1? Yes, we have alternatives for 1460L01-1           

Is there an alternative for part 1460L01-2AF? Yes, we have alternatives for 1460L01-2AF           

Is there an alternative for part 1460L01-2? Yes, we have alternatives for 1460L01-2 This is Medium Duty Wire Nut Fastened Turnlock.

Can you supply the hex slotted head of the HHS series in stainless steel 316? Turnlock can supply the hex slotted head of the HHS series in 316.,

Can you supply the sealed slotted head of the 4002 series in stainless steel? Turnlock can provide the alternative part to the sealed slotted head in stainless steel: HGRTLSS-*S,  

Do you have an alternative for part 27S8-*-1AB?,

, Old

How to increase shear strength in the HHS series? Turnlock has developed a new part to be able to do just that. By adding an aluminium grommet between the belleville washers and the cross pin,,

Do you have an alternative for part 27S8-*-4AB?,

What are the main parts of a Turnlock quarter-turn fastener? A Turnlock quarter-turn fastener is a complete fastening system made up of a stud, receptacle ,

Turnlocks are stud fasteners ,

Is there an alternative for the folding bail handle HGRTLFB or MTHTLFB? Yes, TurnLock has developed a new product, namely the Folding ring version: HGRTLFR-*SK and MTHTLFR-*SK   , This product has a much shorter lead time than the old folding bail handle. Specifically the Folding bail has 14-16 weeks lead time, while the Folding ring only has 4-6 weeks lead time., HGRTLFB                                               HGRTLFR, MTHTLFB                                                 MTHTLFR, The folding ring handle is available in stainless steel, both in the HGR as in the MTH series. These folding ring handles can also be used instead of the stainless steel wing head versions,, ,

LOPCPTTLKW1012ZP

LOPCSCTLW1510ZP

LOPCSCTLH1010SP

LOPCPSCTL0810ZGE

LOPCPSCTL1012ZOR

We know that the forces to close the gasket version of the studs are rather high. This is especially with the hand operated studs as you can not use a tool with a long lever.

What's the correct part number MTHRPM22A or MTHRPM25A? MTHRPM22A was an error in our old catalog.

What stud length do I need with a MTHFTLC-*SK part? Best is to use an example. For instance, you have a panel thickness P of 2.5mm and a frame thickness of 1.5mm.

LOPCSCTLKW1010SP

LOPCPTTLK1010ZP

Is there a way to compensate different panel thicknesses in the HHS series? Turnlock has developed a washer or a "distance plate" in order to compensate several different panel thicknesses.

Self Clinching Turnlocks are minature quarter turn fasteners, there are 3 different series: 1) Light duty One Piece Clinching Push and Turn Turn Lock  = LOPCPTTL

A Turnlock fastener, also known as a quick-action panel fastener or quarter turns, is a fastening device used to join two panels or components together.

Turnlock fasteners are a type of mechanical fastener that works by twisting a component into place.

Yes, we have spring loaded receptacles in stock. Turnlocks require a spring element in the joint to enable them to work correctly. The spring element is incorporated in the spring loaded receptacle and not in the stud .

The difference between hand-operated and tool operated quarter turns, is the head style and way

The fasteners is not rigid since it works under an elastic preload and it will move a bit if you pull the panel. However the system will not open by just pulling the panel.

This is a glamourous Turnlock case !

Can you make the LEA-series sealed? Turnlock offers a sealing gasket for the LEA-series: LEASSGP

Can you supply the part MBBN3059AR and MBBN3059BR? Turnlock can supply these parts under the part number EPHGR-2S MBBN3059AR is a cadmium plated ejector spring.

Why is it so hard to close the HHS series with hand operated studs with sealing gaskets?

  [gbb name="turnlock_parts_explained_mediumduty"]

  [gbb name="turnlock_parts_explained_heavyduty"]

Turnlock fasteners are used for many circumstances where there is a need for quick and repeated access.

The length of a stud the  medium duty tiny housed turnlock MTHTL series is determined according to the assembly that you have and type of receptacle with one of th,

Does there exist a bracket mount to use with the MPP series?   Recently there has been a new bracket developed to use with the MPP-series, the part MPPBPMS:, ,

The first thing you'll need to take care off is to select the correct retaining washer. MTHWFS is a washer which is a lot easier and much faster to install than the MTHWSS:

Does Turnlock have the 26R5-* receptacles available? The alternative part for 26R5-13 is MTHRSPM26ZY slim panel mount yellow zinc receptacle.,

LOPCSCTLWO1010ZP

LOPCPSCTL1010ZRD

Fasteners may seem like a small detail, but when it comes to fixed guards, enclosures, and access panels, they play a huge role in

Can Turnlock supply the part 50S10-9-4AN ? The part 50S10-9-4AN is a very old part number and is the cadmium plated cross head stud of the LEA-Series

In the HHS series, for some kind of application, you can request the stud in black color by oxydation.

The Turnlock Push Button MPP-Series is a type of fastener used for detaching and attaching panels.,

For the stud JN0426-05 the 

NTA12852 parts can have a leadtime of more then a year and will cost you a fortune.  If you are

The installation of following slotted retaining washers MHSWSS, MTHWSS, LMHWSS &

There are a few different types of sealed options assembly for quarter turns. To make a quarter turn sealed on an assembly, you will typically need to add or incorporate gaskets in the assembly.  

 

Question:

Why is weight reduction so important in aerospace? Is aluminium which has half the weight of steel, the answer? Is aluminum a big saver in costs?  To know the answer we need to make a calculation. 

LOPCPSCTL1010ZBL

LOPCPSCTL1010ZBL

The adjustable receptacle has a dimension width of 22mm

When specifying Turnlock receptacles to be hard anodized, it’s important to consider the potential challenges this process may introduce.

How to calculate your stud length for LEATL series? , Next you need to choose if you want to use a grommet or retaining washer. Depending on which you select, you need to use the below drawing to calculate the total panel thickness:, After selecting the receptacle, which retaining washer you wish to use, you just need to select the head style of the stud. Then you're ready to calculate the stud length. For example:, If you'd prefer to use a retaining washer MHSWPS instead of the grommet, you need to use formula: T = P = 2.7 , which results in stud length 8 which is used between T value 2.30 and 2.90, Note: you can use either the retaining washer or the grommet to hold the stud in place when the assembly is opened. Do not use them together.

Both of these thread types are use for imperial thread. BSF and BSW are Britisch measurement systems, while UNF and UNC are American measurement systems.

Can you supply the Bombardier Transport P/N 520094180? Turnlock can supply the Bombardier Transport P/N 520094180. This part is a stainless steel hex recess head stud., If you have an urgent need for the Bombardier Transport P/N 520094180 It is standard available in our stock!

A TurnLock quarter-turn fastener is an effective way to securely lock mechanical arms in place.

How to calculate your stud length for MTH series?, After you've calculated the correct stud length, you'll need to use the Stud length tables in the Turnlock catalogue. Be careful that you select the correct stud length table according to the type of receptacle., Example 1: You have a panel thickness of 3.00 mm and a frame thickness of 1.50mm. The receptacle you wish to use is the type A bronze with zinc plating receptacle MTHR25BZ and a wing headed steel zinc plated stud., Example 2: You have a panel thickness of 7.20 mm and a frame thickness of 4.50mm. The receptacle you wish to use is the type B aluminium receptacle MTHRPM2HA and a Folding Ring handle stainless steel stud., Example 3: You have a panel thickness of 3.00 mm and a frame thickness of 10.50mm. The receptacle you wish to use is the type C stainless steel receptacle MTHRF25S and a stainless steel cross headed stud., Example 4: You have a panel thickness of 8.15 mm and a frame thickness of 8 mm. The receptacle you wish to use is the type D zinc die casted receptacle MTHRTZZ and a slotted headed steel zinc plated stud., Example 5: You have a panel thickness of 3.00 mm and a frame thickness of 1.50mm. The receptacle you wish to use is the type E stainless steel adjustable receptacle MTHRA24S and a stainless steel flush cross headed stud.

Can You Supply the part LN29711-1 ?

Half-turn fasteners, also known as TurnLocks, are a fast and efficient method for opening or shutting panels with merely a Half-turn or Quarter-turn. They will be the perfect option in applications where speed and convenience are vital.

Question: What is the recommended pitch (distance) between two turnlocks? 

Anemo Engineering (Alveringem, Belgium) has launched a Japanese website for its "Turnlock" fastener, which facilitates the fastening and removal of two panels.

Is the 710S01-K1-1 still available? The part number 710S01-K1-1 has become an old part number. New part number for 710S01-K1-1 is LOPPTTLW15-50PB,

Is there a stainless steel version of the knurled slotted head stud of MTH-series? Yes there is. It is made from stainless with electropolished surface, therefore it is rather shiny., ,

Are there any receptacles that can be welded in the HHS-series? Yes, we have 2 types of recepacles that can be welded. Either with weld nibs, where it is needed to spot weld the receptacle to your panel,, This is the type with welding nibs: , This process is used in mass production with which you need a special machine to do it. With this machine you combine pressure while also pushing a current through the weld nibs., The receptacle that needs to be welded on by traditional manner looks like the following receptacle:, As mentioned, this receptacle needs to be welded on by the traditional manner such as TIG or MIG welding. This process takes much longer than the spot welding. Here's drawing of how you'll need to weld this receptacle:, There is also a difference in the plating. When needed to weld a receptacle to a panel, The choice is between either a zinc plated or an oil coated steel receptacle., The part number with weld nibs is HHSRFWZ (zinc plated) or HHSRFWB (blank/oil coated) Without weld nibs, the part number is HHSRFWSZ (zinc plated) or HHSRFWSB (blank/oil coated)

What is the difference between a TurnLock and the part number I requested?, Form Fit Functionality Material and Finish Made according to the same quality and standard Guaranteed same tensile strength Identical corrosion resistance , Please contact us for the additional information or a quote. ,          

No, these are not required for TurnLock items.  CE marking is only needed in Europe when the fasteners would be installed in a building.

Do the turnlocks lock in position, or do they move freely?   , Yes these lock in position. You need to do a quarter turn, so that the stud pin goes over the cam. Once over, it locks over the cam. This makes sure that our TurnLock parts are very vibration resistant.

What is the clamping force of Turnlock parts?   a turnlock typically does not provide a guaranteed fixed clamping force., If you need a quarter turn with a guaranteed clamping force that is repeatable, we suggest to switch to our SPANCLAMPS:

Turnlocks are also known as the lock to close a Handbag or a purse or shoulder bag. These Turnlocks are not the fasteners we are selling. we are not into the cloths and fashion industry.

Select your stud by using below table.  the amount of protrusion of the receptacle MTHRTA16A or MTHRTA16S below table is valid only when your upper plate measure = 0mm (which is never the case)

What receptacles can be used for more than 1 series? , The receptacle of the HPT-series: HPTR34Z ; can be used for both the HPT-series as the MPTEG-serie, Another example of mixed receptacles is the flat receptacle of the MHS-series: MHSRF33Z

Does TurnLock have small captive fasteners ? Yes we have some small captive fasteners available. One example of a small captive fasteners is: LOPTLS-1014P, For more information on small captive fasteners, please contact us.

Question:

How to increase clamping force in a Turnlock Assembly? In the MTH and HGR series, there exist adjustable receptacles., HGR-series:                                       &n, The advantage with this receptacle is that you can put a higher pre-load on the fastener.

Question: Top panel would be about 15mm., , Answer: Preload is the spring force = 30N, The weight of your panel will also determine what the side loads = shear strength will need to be.

Do you have more information on your HSA material? HSA stands for High Strength Aluminium. It's a material we can supply for some of our parts. You can find the parts here:, The material has properties so that it has a strong tensile and shear strength. It's being used in racing, Airbus/Honeywell, etc.

The direction of the folding ring handle Turnlock when locked is can be follow:

This Turnlock tool ITRP-1Z is used to install the retaining ring on the grommet of the HGR series. The tool can install the following retaining rings: HGRGZ, HGRGRS or HGRGRSNM., , You'll notice that it is very user friendly! After doing the correct handling, you'll see that the grommet will be completely fixed with the retaining ring in the panel, and can't move anymore.

Can you supply the turn lock fastener?    Yes, TurnLock supplies the turn lock fastener. The turn lock fastener is the same part as our TurnLock parts.

Question: Can you confirm this is the correct orientation for the black rubber grommets (Center-Right) as assembled or should they be the other way around?

Does chrome plating have a better corrosion resistance than zinc plated parts? Yes, Chrome plating will have a better corrosion resistance and will be generally better to use in marine environments than zinc., For example, the part MTHTLK-*C , The results will be pretty close to each other and the thickness of the

Question : Hi there,

What is the part HHSTLW-16ZBG? Is the Black glossy coated part of the HHSTLW-16Z version. More information here: https://www.turngrip.store/hhstlw-16z  

Do you offer Tridair parts?                                    &nbs, , , The Tridair parts such as KNQ-2 are offered by Turnlock. Please contact us for more information on Tridair parts or KNQ-2

How to install an adjustable receptacle? The adjustable receptacle consists of 3 parts: The cage, the insert and the pin The insert can be screwed in or out of the cage so that the the correct adjustments are used., Please follow the following steps: 1) engage the stud 2) screw the insert to the lock condition 3) adjust all fasteners in the panel 4) use a quick push turn action to unlock the stud 5) remove the panel, As panels tend to have a life of their own, just locking sequences can suddenly render a fastener too tight/too loose.

Do you have the receptacles 98265-2-210 available?                                &nbsp, Note that the receptacle 98265-2-210 is made of Silicon bronze with cadmium plating, while our receptacle HGRR33BZ is made of hard bronze with zinc plating.

Is it possible to use a higher stud length with the LEA-series? Yes you can use a stud length up to 67. You need to calculate "G" which is the total thickness. From there on you can select your stud length.,

Do you have the tables for longer stud lengths in the HGR series with adjustable receptacles? , Stud length Type D receptacle with   plus flush grommet

Can you supply DON part numbers? Yes, these parts are available at Turnlock. The cross reference for these parts are the following: , DON part number Turnlock part number , For more information, please contact us!

Can you supply a spring to use with the HHS-studs? Yes, we can supply the part HHSSS which is a spring used on the studs. When unlocked the spring will make sure the stud pops out of the panel.

We can help you certainly.

Do the HGR studs meet or exceed the mechanical properties of MIL-F-5591?

06.43809-0181 is a receptacle that is used by

Question:

Yes, we have a variety of tamper proof Turnlocks, typically they come with a manufacturing leadtime of 14 weeks, and a min. requirement of 100-500 pieces.   This is newly developed in the MHS series:

40S80-*E is a tamper proof stud which has become obsolete. You can replace it by the Turnlock HGRTLT-*SK in stainless steel. MOQ is 100 pieces and estimative lead time 8-10 weeks.

For a project with a customer with the part number MPTTLK-03-2530S but is not in stock.

Is there an insert receptacle for the MHS series? Yes there is, it has a M16x2 thread. This part used to be called V50R19-02-10-BP If you're looking for the part V50R19-02-10-BP, we can help you!, , For more information on this part, please contact us!

Question:

Can you supply the tools 4-GM or 4-PF ? These are old tools, but yes we can supply them. In order to quote these parts, we need the dash number. Here's the explanation: , , Note that 4-GM-1 and 4-PF-1 for example, need to be used together

Do you have the part HHSTLHR-*Z available in Stainless steel? Yes we do, it's part number HHSTLHR-*S Here's a list of the references that are available:   ,

The Alconic parts you need are old references.

What Automotive Fasteners do you have available? These are the same as our push pull fasteners range. To receive a quote or a push pull turnlock alternative, please contact us.,

With no lube, we have seen in the cycle tester, notable particle FOD  

, , ,

Here you see an installed wing head stud MTHTLW-1S on an electrical circuit board.

Application for MPPTLB-*Z : MPPTLB-*Z is used in a milling machine, which is the part that gives tools.  ,   , ,  

If you were using Oddie Fasteners until recently, then you are undoubtedly looking for the best alternative now. We'd be happy to help you optimize your choice of 1/4 turn fasteners.

For the smallest version of The Light duty One Piece Push Turn Close TurnLock series, the reference is LOPPTCTL-1Z the big one is

Question: We have interest in the HH parts shown below.

Does there exist a bracket mount to use with the LEG series? The new bracket developed for the MPP-series also matches for the LEG-series. Part number is the same though: MPPBPMS, ,

There aren't many quarter turns available in stainless steel 316, there is the receptacle MHSRF33S316 and the stud MHSTLHR-10S316 but only in stud length 10., How does the turnlock assembly Stainless steel 316 work?   For a turnlock assembly to work as it should, there needs to be a spring effect in the assembly, either in the stud or receptacle.,

Do you have an alternative for the part 26R3-1?   Yes we do have an alternative for 26R3-1, which is the Turnlock part MTHRPM2HA, , ,   When you require a quote for our alternative of 26R3-1, please contact info@turngrip.store

Is there a spring loaded stud of the HHS series? , Yes there is. The old part number was the 991S02H-*AGV, which was the spring loaded stud. However, that part has become obsolete, new part is HHSTLWS-*Z, , , If you have a question or enquiry regarding 991S02H-*AGV or the new available part HHSTLWS-*Z, please contact our sales team on info@turngrip.store  

Yes there is, the part number is LEATLSR-*Z This part is in the Light duty Easy Assembly series, and has a light tensile strength of 900 Newton. The head style is typically used in railroad applications:

Does there exist a bracket mount to use with the MTH-series? The new bracket developed for the MPP-series also matches for the MTH-series. Part number is the same though: MPPBPMS, ,

, , , , ,

Question Thank you for your feedback.

The cycle number of the TurnLock quarter turn can be repeated more than 15000 times if the assembly instructions are followed. If you have an application and special use, the number of TurnLock quarter turn cycles will not be optimal.

Do your fixings contain '' chrome 6 ''? No !

Is it possible to have a waterproof assembly of the Light duty Easy Assembly (LEA) series?

Why does the catalogue start from -3 in the HGR-series instead of -1? Reason for this, is that dash length 1 and 2 range from 0.5mm to 2.05mm.

New to the Medium duty Push Push series is the "INVISIBLE" turnlock assembly. The stud is installed at the bottom of the panel instead of going through the panel:

With the Medium duty Push Push (MPP) series, such as MPPTL-5N, you only need to push once and it is closed and push again to open.

The interpretation for structural is that any structure such as a fastened panel is critical to the design loads of an airframe.  If fasteners fail and the

[gbb name="turnlock_parts_explained_lightduty"]

The Turnlock series available are:

This manufacturer provides his client a time-saving solution by installing Turnlock on their panels.

Is there an alternative part for 214-16SD? Turnlock can provide the part HGRR33S It is the exact same part as the 214-16SD part,

Dear Customer. Your old part has a larger cup size with the same length number 8. The change goes until length 15, the old series have a larger spring cup size.

What are the TurnLock Ejector spring?   The Turnlock ejector spring provides full retraction of stud assembly to allow opening and closing of equipment without the possibility of jamming or damage.

What can you do about the adjustable receptacle sticking out? Question: We have installed on our helicopter: MTHRA24HSA MTHWFS MTHTLC-3S , We are happy about the system, but it seems MTHTLC-3S is too high for our configuration since we needed to adjust receptacle MTHRA24HSA. The threaded part sticks out about 4mm, which seems too much. What do you think about the configuration?, , The adjustable receptacle would also work with MTHTLC-2S or even MTHTLC-1S. The biggest issue is that the adjustable receptacle sticks out.

Here are the tables for longer stud lengths not all the stud length numbers can be made, please consult us. for plus flush grommets:

The folding ring does not snap into place at the 0° and 90°, but it does not wobble around freely.  

Can you quote the  Assy fasteners 88-50-16-00007-00? see pic.

Unified UNF Screw Threads ANSI B1.1

This is an application of Light Duty Easy Assembly of an installed clip-on receptacle and the stud with snap-in grommet. In just a few simple steps you can easily install the clip-on receptacle and the grommet.

Para empezar podemos confirmar que el acero inoxidable usado es austenítico. Con referencia a los grados de SAE, significa que pertenece a la serie 300.

  We received a very nice case story on the usage of HGRRN33BZ and HGRTLS-13Z

The receptacles Camloc MHSRFWZ, HHSRFWZ and turnlock MTHRFWS are prepared with weld nibs.    

What are extra heavy duty Turnlocks? Extra heavy duty Turnlocks can carry up to 22000 Newton in tensile strength. It consists of a stud, which can be a hex head or handle operated, a cross pin and a receptacle:

I have the following question:

Technical question according the HGR series. Why, in the catalogue, the first length is the number 3 instead of 1? What is the reason because we have already ordered the length n°1 & n°2 in the past ?

Do you have a threaded receptacle for the MHS or HGR series? Yes, we have a recently developed special receptacle for the MHS and HGR series., This part is called the MHSRTM16S It is a stainless steel receptacle that needs to be screwed in to the parent material. MOQ for this part is 500 pieces with a lead time of 14-16 weeks.

When making an enquiry, make sure you forward your panel thicknesses so we can calculate which stud length you need.

Do you have the countersunk receptacle available 26R6-4BB? Yes, we have an alternative version available of 26R6-4BB: MTHRLWC26SK It has the same dimensions and technical properties as 26R6-4BB.